LF Plus & LF-E Plus - 1kN Single Column Bench Top Tester Effective Systems for testing food textures, small components and devices, thin paper and plastic films, fine wires, etc   Features: Single column for testing in Tension/Compression with test speed selectable up to 1270mm/min and capable of cycling to load and extension limits Test load up to up to 1kN (102kgf/225lbf) Load and extension are displayed on a highly legible backlit LCD display, selectable in a variety of units Multi-lingual instructions are displayed in a sequential menu driven format Standard crosshead displacement of 500mm (19.69in) for LF Plus and 750mm (29.52in) for LF Plus-E Extension resolution <  1.3 micron Can be further enhanced with state of the art NEXYGEN materials test and data analysis software and Ondio  applications builder software Load measurement system exceeding the requirements of BS EN ISO 7500 1999 Class 0.5, ASTM E4, DIN 51221       LRX Plus & LRX-E Plus - 5kN Single Column Bench Top Testers Reliable high throughput tester for rigid rubber and plastic materials, thin wires, etc   Features: Single column for testing in Tension/Compression with test speed selectable up to 1020mm/min and capable of cycling to load and extension limits Test load up to up to 5kN (1124lbf) for LRX Plus and up to 2.5kN (562.5lbf) for LRX Plus-E Load and extension are displayed on a highly legible backlit LCD display, selectable in a variety of units Multi-lingual instructions are displayed in a sequential menu driven format and storing up to 600 test results from a choice of ten (10) programmable (SMART) test setups 32 bit dedicated microprocessor controlled, closed loop servo drive ensures accurate speed, load rate, constant load and strain rate control Data sampling rate of 8kHz Crosshead displacement of 735mm (28.94in) for LRX Plus and 1370mm (53.94in) for LRX-E Plus Extension resolution <  0.1 micron Can be further enhanced with state of the art NEXYGEN materials test and data analysis software and Ondio  applications builder software Load measurement system exceeding the requirements of BS EN ISO 7500 1999 Class 0.5, ASTM E4, DIN 51221 LR5K Plus, LR5K-E Plus, LR10K Plus & LR10K-E Plus - 5kN & 10kN Twin Column Bench Top Testers High performance tester for rigid rubber, plastic or composite materials, wires & cables, wood products (particle board, MDF), light metal, etc     Features: Twin column for testing to FULL LOAD AT FULL SPEED in Tension/Compression and capable of cycling to load and extension limits Load and extension are displayed on a highly legible backlit LCD display, selectable in a variety of units Multi-lingual instructions are displayed in a sequential menu driven format and storing up to 600 test results from a choice of ten (10) programmable (SMART) test setups 32 bit dedicated microprocessor controlled, closed loop servo drive ensures accurate speed, load rate, constant load and strain rate control Data sampling rate of 8kHz Working test space between columns of 400mm (15.75in) and a standard crosshead displacement of 975mm (38.39in) for LR10K Plus and 1000mm (39.37in) for LR5K Plus (Exended version with crosshead displacement of 1475mm (58.07in) for LR10K Plus-E and 1500 mm (59.05in) for LR5K Plus -E Can be further enhanced with state of the art NEXYGEN materials test and data analysis software and Ondio  applications builder software Load measurement system exceeding the requirements of BS EN ISO 7500 1999 Class 0.5, ASTM E4, DIN 51221 LR5K Plus           ·        Test load up to 5kN  (500kgf/1124 lbf)           ·        Crosshead speed selectable up to 1020mm/min with speed accuracy< 0.2% of steady state           ·         Crosshead travel of 1000mm           ·         Extension resolution < 0. 1 micron LR10K Plus           ·         Test load up to 10kN  (1000kgf/2248 lbf)           ·         Crosshead speed selectable up to 510mm/min with speed accuracy< 0.2% of steady state           ·         Crosshead travel of 975mm           ·         Extension resolution < 0. 1 micron   LR5K Plus / LR10K Plus-E Plus (Extended Version)           ·         Similar to LR10K Plus / LR5K Plus but with extended crosshead travel of 1460mm.   EAZY TEST EZ20 & EZ50 - 20kN & 50kN Twin Column Benchtop Testers High performance tester for composite materials, wires & cables, hard wood products (plywood, MDF), metals, etc Features:     Twin column for testing in Tension/Compression and capable of cycling to load and extension limits Load and extension are displayed on a highly legible backlit LCD display, selectable in a variety of units Multi-lingual instructions are displayed in a sequential menu driven format and storing up to 600 test results from a choice of ten (10) programmable (SMART) test setups 32 bit dedicated micrprocessor controlled closed loop servo drive ensures accurate speed, load rate and strain rate control Data sampling rate of 8kHz Working test space between column of 400mm (15.75in) and a standard crosshead displacement of 855mm (33.7in) for EZ50 and 870mm (34.3in) for EZ20 Can be further enhanced with state of the art NEXYGEN materials test and data analysis software and Ondio  applications builder software Load measurement system exceeding the requirements of BS EN ISO 7500 1999 Class 0.5, ASTM E4, DIN 51221       EZ20  Test load up to 20kN (2000kgf/4496ibf) Crosshead speed slectable up to 508mm/min (for test up to 20kN) and up to 1016mm/min (for test load up to 10kN) with speed accuracy <0.2% Crosshead travel of 870mm Extension resolution <0.1 micron       EZ50    Test load up to 50kN (5000kgf/11240ibf) Crosshead speed slectable up to 250mm/min with speed accuracy <0.2% Crosshead travel of 855mm Extension resolution <0.1 micron                  LR30K Plus, LR30K Plus-E, LR50K Plus & LR50K Plus-E  - 30kN & 50kN Twin Column Benchtop Testers  High performance tester for composite materials, wires & cables, hard wood products (plywood, MDF), metals, etc Features:       Twin column for testing to FULL LOAD AT FULL SPEED in Tension/Compression and capable of cycling to load and extension limits Load and extension are displayed on a highly legible backlit LCD display, selectable in a variety of units Multi-lingual instructions are displayed in a sequential menu driven format and storing up to 600 test results from a choice of ten (10) programmable (SMART) test setups 32 bit dedicated microprocessor controlled, closed loop servo drive ensures accurate speed, load rate, constant load and strain rate control Data sampling rate of 8kHz  Working test space between columns of 404mm (15.75in) and a standard crosshead displacement of 855mm (33.66in) for LR50K Plus and 870mm (34.25in) for LR30K PLus (Extended version have crosshead displacement of 1524mm (60in) for LR50K Plus-E and 1370mm (53.9in) for LR30K Plus-E Can be further enhanced with state of the art NEXYGEN materials test and data analysis software and Ondio  applications builder software Load measurement system exceeding the requirements of BS EN ISO 7500 1999 Class 0.5, ASTM E4, DIN 51221 LR30 Plus Test load up to 30kN (3000kgf/6744ibf) Crosshead speed selectable from 0.001 to 508mm/min with speed accuracy < 0.2% at staedy state Crosshead travel up to 870mm Extension resolution < 0.05 micron          LR50 Plus Test load up to 50kN (5000kgf/11240ibf) Crosshead speed selectable from 0.001 to 508mm/min with speed accuracy < 0.2% at staedy state Crosshead travel up to 855mm Extension resolution < 0.05 micron          LR30 Plus-E /LR50K Plus-E (Extended Version) Similar to LR30K Plus / LR50K Plus BUT with EXTENDED CROSSHEAD TRAVEL of 1370mm / 1524mm respectively   LS100 Plus - High Force Twin Column Benchtop Tester Low cost benchtop tester for high tensile wires, hard wood products, metals, etc   Features:   Twin column for testing in Tension/Compression with test speed selectable up to 254mm/min (for test load up to 50kN) or up to 101.6mm/min (for test load up to 100kN) with speed accuracy <0.2% and capable of cycling to load and extension limits Load and extension are displayed on a highly legible LCD display, selectable in a variety of units Multi-lingual instructions are displayed in a sequential menu driven format and storing up to 600 test results from a choice of ten (10) programmable (SMART) test setups 32 bit dedicated microprocessor controlled, closed loop seMulti-lingual instructions are displayed in a sequential menu driven format.rvo drive ensures accurate speed, load rate, constant load and strain rate control Data sampling rate of 8kHz  Working test space between columns of 404mm (15.75in) and a standard crosshead displacement of 840mm (33in)  Can be further enhanced with state of the art NEXYGEN materials test and data analysis software and Ondio  applications builder software Load measurement system exceeding the requirements of BS EN ISO 7500 1999 Class 0.5, ASTM E4, DIN 51221  LR100K Plus, LR150K Plus & LR300K - 100kN, 150kN, 300kN Twin Column Floor Standing Testers High performance floor standing tester for high tensile, compression, flexural test.   Features:    Twin column for testing to FULL LOAD AT FULL SPEED in Tension/Compression and capable of cycling to load and extension limits Load and extension are displayed on a highly legible backlit LCD display, selectable in a variety of units Multi-lingual instructions are displayed in a sequential menu driven format. Dedicated microprocessor controlled, closed loop servo drive ensures accurate speed, load rate, constant load and strain rate control Working test space between columns of 620mm (24in) and a total crosshead displacement of 1150mm for LR100K Plus, 1050mm for LR150K PLus and 1295mm for LR300K Can be further enhanced with state of the art NEXYGEN materials test and data analysis software and Ondio  applications builder software Load measurement system exceeding the requirements of BS EN ISO 7500 1999 Class 0.5, ASTM E4, DIN 51221   LR100K Plus