|
|
| ADVANCED MODERN DESIGN |
|
|
| 5kN MODEL LS5 (NEW) |
|
| RELIABLE SYSTEM FOR MANY TEST APPLICATIONS |
|
|
| MODELS WITH MAXIMUM TESING LOAD OF 1kN AND UP TO 150kN |
|
| MFI - METHOD A & B |
|
|
| MFI 10 - VERY GOOD REPEATABLE RESULTS |
|
Lenniko MTM Systems & Services
Lenniko Resources
"providing SOLUTIONS for MATERIALS & PRODUCTS
TESTING"
23, Jalan Jalil Perkasa 9, Taman Esplanad,
Bukit
Jalil, 57000 Kuala Lumpur, MALAYSIA.
|
We
specialize exclusively in universal tensile testing machines
of
(ISO 9001:2008 accredited UK company
and recognised worldwide test machine supplier)
...... offering EXPERT materials test SOLUTIONS & testing capabilities for:
-
tensile strength (pull)
-
compression or crush
-
flexural or bend
-
creep and relaxation
-
friction or slip
-
adhesion
-
bonding or peel
-
tear
-
cyclic
fatigue
-
food texture analysis
-
snap on and off
-
shear
-
ductility and insertion
-
......... and MORE!
......including LLOYD - DAVENPORT Plastics & Polymer Test Instruments for:
All TESTER SYSTEMS supplied WILL BE PROVIDED with LOCAL SUPPORT
for installation, commissioning, training on operation, repairs and maintenance. A full year warranty is normally provided
with every system installed by experienced service engineers
After sales service is available, including annual service agreement
tailored according to the customer requirements
Specially fabricated test grips, jigs or fixtures can be made
according to customer or test methods specific requirements.
Verification or calibration of the test systems can be organized
accordingly
|
Test system with maximum testing load from 1
kN up to 150 kN (100 kgf to 15000 kgf) and testing speed selectable up to 2032mm/min, 1016mm/min, 508mm/min or 254mm/min
are available for selection to perform test such as Tensile, Compression, Bending/Flexural, Shear, Fatigue, Creep,
Cycling, Peel, Adhesion, Hardness, Elongation, etc
...... including polymer test instruments to determine melt flow index, melt flow rate, melt volume rate, intrinsic
viscosity and melt viscosity
Meeting the requirements of the following industries & institutions:
-
Rubber Industries: molded rubbers, gloves, condoms & other medical devices
-
Plastic/Composite Industries: packaging, pipes, sheets, films, PET & other finished products
-
Metal Industries: steel rod/sheets,
wire/cables, aluminum extrusion & other finished products
-
Wood Industries: MDF board, plywood, etc
-
Food Industries:
textural, mechanical
and physical of raw ingredients and finished food products
-
Universiities, Educational
& Government Institute
More information on Universal
Testing Systems & Polymer Test Instruments ** available at www.lloyd-instruments.co.uk
|
LLOYD UNIVERSAL
TENSILE TESTING SYSTEMS WILL FUNCTION AS A STAND ALONE MANAUL TESTER ......
|
|
| LOW COST REPEATABLE & RELIABLE TESTING |
|
|
| 1kN, 2.5kN & 5kN SINGLE COLUMN MODEL: LS1, LS2.5 & LS5 (NEW) |
|
| USER FRIENDLY, MODERN DESIGN & HIGH PERFORMANCE |
|
|
| 5kN & 10kN MODEL: LR5K PLUS & LR10K PLUS |
|
| ADVANCED MICROPROCESSOR CONTROL |
|
|
| 20kN & 50kN MODEL: EZ 20 & EZ50 |
|
|
| LOAD RATE CONTROL & 8kHZ DATA SAMPLING RATE |
|
|
| 30kN & 50kN MODEL: LR30K PLUS & LR50K PLUS |
|
| LOW COST BENCHTOP HIGH LOAD TESTING |
|
|
| 100kN MODEL LS100 PLUS |
|
| FLOOR STANDING HIGH LOAD TESTING |
|
|
| 100kN &150kN MODEL: LR100K PLUS & LR150K PLUS |
|
....... OR FURTHER ENHANCED WITH TESTING SOFTWARE FOR ALMOST UNLIMITED TESTING POSSIBILITIES
INCLUDING RESULTS PROCESSING IN A FAMILIAR MICROSOFT WINDOWS ENVIRONMENT
|
|
| USER FRIENDLY & ISO TickIT APPROVED |
|
|
| NEXYGEN PLUS & NEXYGEN MT TESTING SOFTWARE |
|
| ONDIO APPLICATION BUILDER SOFTWARE |
|
|
| ENHANCED NEXYGEN MT SOFTWARE USING VB SCRIPT |
|
|
| LS1 WITH PC CONTROL FROM NEXYGEN PLUS |
|
|
| TENSILE TEST |
|
| LRX PLUS POGO WITH PC CONTROL FROM NEXYGEN PLUS |
|
|
| FOAM COMPRESSION TESTING |
|
| LR5K PLUS EXTENDED - PC CONTROL FROM NEXYGEN PLUS |
|
|
| TENSILE TEST |
|
|
